Mixer:

4 multi-input stereo channels: RIAA preamps for turntables on 4 inputs

3-band total kill EQ: +6dB to off

2 FX sends: pre/post selection (internal on FX2)

2 stereo returns

Headphone monitor with mix/cue control: 3.5mm and ¼” sockets

2 analogue VCF filters: low-pass, band-pass, high-pass, resonance frequency, and filter ‘on’ switch

Assignable LFO with depth control

Mic input: On XLR connector; gain control and 2-band EQ control available

Power supply: High performance internal switch-mode supply

RIAA: for THREE turntables (four via internal jumper link)

Dual Rail VCA Cross Fader

USB SoundCard:

Uses 24 bit stereo Analogue to Digital converters and Digital to Analogue converters (not lower spec CODECs

Sample rate can be set to either 44.1kHz or 48kHz; interfaces to any digital audio source up to 192kHz

Soundcard fed from main mix, FX1, or direct from channels

8 channels - either 6 channels from a PC and 2 returns or 4 channels from a PC and 4 returns.

Sends - mix, FX, or individual analogue channels may be routed to PC or digital outputs

MIDI Controller:

Mappable MIDI controls:

105 MIDI control messages available

8 x 60mm linear faders

16 x detented rotary pots

10 rotary encoders, 50 switches, 2 custom jog wheels with micro switches

8 illuminated push switches

Multi-function jog wheels with switched navigation control

Xone:3D is compatible with any PC software that has MIDI assignable functions: for instance,

lighting controller or visual effects programs