TW AUDiO now not only operates successfully on the German market, but also supplies neighbouring countries such as Holland, Switzerland and  Austria, and countries outside Europe. The quality and sound of the TW AUDiO range is also appreciated in China, Korea and Qatar.

Increasing interest and inquiries from many countries show that TW AUDiO can also impress on international stages.







T24 Top power focused







































T24 Top power focused Technical Data

Drivers	2 x 12" LF / 1 x 1,4" HF
Frequency range	100 – 18000 Hz
Power capacity programm / peak:	1000 / 2000 W biamped LF 150 / 300 W biamped HF 1200 / 2000 W passiv
Impedance	4 Ohm biamped LF 8 Ohm biamped HF 4 Ohm passiv
Coverage range (h x v)	60° x 40° HF-horn rotable
Sensitivity 1 W / 1 m	107 dB biamped LF 112 dB biamped HF 110 dB passiv
SPLmax / 1 m / peak	143 dB
Connectors	2 Speakon NL4
Dimensions (h x w x d)	706 x 440 / 224 x 440 mm
Weight	45 kg / 46 kg with passive crossover
Finish	Warnex structure paint
Accessoires	CaseT24, FDB30, SBT24, CBT24, BLT24, MCT24 CoverT24
Options	PWT24 internal passive crossover, RAL colours

T24 Top power focused Accessoires

	BLT24 Boxlink connection steel with doublestuds Boxlink connection steel with doublestuds and locking splints to install T24 / S30 below each other, steel capa- city 130 kg based on BGV-C1 with safety factor 10
	CaseT24 Flightcase for two T24 Flightcase for two T24, professional version made of black PVC laminated 9 mm birch plywood, four 100 mm swivel castors with brakes, recessed sprung handles, dimensions 980 x 480 x 920 mm, weight 40 kg
	CBT24 Cradlebar with two doublestuds and locking splints to fly T24 Cradlebar with two doublestuds and locking splints to fly T24 loudspeaker, incl. safety SS08-100 and shackle SK10, dimensions 405 x 80 x 8 mm, weight 1.8 kg
	CoverT24 Protective cover professional T24 Protective cover professional version made of black po- lyester with inner foam to cover T24 when transported on FDB30
	FDB30 Dolly to mount on B30, S30 and T24 Dolly to mount on B30, S30 and T24 front, four 100 mm swivel castors, thereof two with brakes, two butterfly catches, four carrying handles, dimensions 700 x 440 x 170 mm, weight 9 kg
	MCT24 Maincradleframe T24 Maincradleframe, side-by-side mounting at 45° angle, for flying of two T24 cradlebars next to each other, incl. M12 screw set, dimensions 590 x 480 x 60 mm, weight 10 kg
	PWT24 Passive option T24 Passive option, internal passive crossover enables passive operation of T24 top at one amplifier channel (4 ohms nominal impedance)
	SBT24 Swivel bracket to mount T24 Swivel bracket to mount T24 system on stand / distance pole or with DHST directly on truss, installation at T24 with grid mechanism without tools, weight 6 kg
	DHRT Doughty Halfcoupler Slimline Doughty halfcoupler slimline with M12 ring nut, maxi- mum load 240 kg, for single point installation at circular tubes with diameter 45 - 48 mm
	DHST Doughty Halfcoupler Slimline Doughty halfcoupler slimline with M12 screw and stop Nut, maximum load 240 kg, for single point installation at circular tubes with diameter 45 - 48 mm
	DSF Aircargo Doublestudfitting Aircargo doublestud fitting for for M12 / M15 /T24 / S30 loudspeakers, latchable in flying track
	HSF MOUNTING ADAPTER Flange to mount swivel brackets on standard speaker stand or distance pole (36 mm pipe), incl. two M10 screws and nuts
	KSVO6-035 chain fastener chain fastener hardened, tempered and galvanized, CE certified, 0.35 t WLL, enables direct connection of two DSF or connection of DSF with DHRT
	RSM10 Eyebolt M10 Eyebolt M10, DIN 580, galvanized, WLL 0.23 t
	SS06-100 Safety, steel, diameter 6mm Safety steel, diameter 6 mm, length 1 m, for saving loads up to 60 kg based on VBG requirements incl. two shackles with WLL 0.5 t
	SS08-100 Safety, steel, diameter 8mm Safety steel, diameter 8 mm, length 1 m, for saving loads up to 120 kg based on VBG requirements incl. two shackles with WLL 1 t
	BAT24 Adapter for connecting the BBT24 with the MCT24 Adapter for connecting the BBT24 with the MCT24, connection through bolt and split pins, dimensions: 124 x 46 x 40 mm, weight: 0.9 kg
	BBT24 Bracket on the rear side for hanging several T24s Bracket on the rear side for hanging several T24s below one other, connection through a locking mechanism and ball lock pin, dimensions: 732 x 100 x 105 mm, weight: 2.2 kg.
	BCT24 Adapter for connecting the BBT24 with the CBT24 Adapter for connecting the BBT24 with the CBT24, connection through ball lock pin and screw, incl. two M12 x 30 screws and two M12 locking nuts, dimensions: 260 x 126 x 48 mm, weight: 1 kg
	ASK4 Quad-chain stop chainQuad-chain stop chain, for hanging of a MCT24 from an attachment point, incl. 1 x SK20 and 4 x SK10 shackles, can carry 1.12 t WLL, dimensions: 510 x 80 x 80 mm, weight: 2.7 kg